New
-
1.
AERONAUTICAL
COMMUNICATION
Presented By Nayipathshala
-
OVERVIEW
Introduction
Aeronautical communication architecture
Wireless cabin architecture
Satellite connection
Technical overview and table
Service integrator and dimension
Advantage
Disadvantage
conclusion
-
INTRODUCTION
Communication b/w aircraft cabin to the terrestrial network via
satellite segment.
Global coverage is essential for providing continuous service.
Wireless services such as UMTS, Bluetooth and W-LAN in aircraft cabins.
Airlines are increasingly requiring in-flight services to offer similar
entertainment or business experience to passengers as their terrestrial
counter part.
-
AERONAUTICAL COMMUNICATION
ARCHITECTURE
-
WIRELESS CABIN
ARCHITECTURE
GSM telephony is prohibited in commercial
aircraft
TDMA technology
Wireless access technologies
-
WIRELESS CABIN ARCHITECTURE
-
CABIN SEGMENT
I. Wireless LAN for IP services
II. UMTS (The Universal mobile telecommunication system) for
personal and data communications
III. Bluetooth for IP access for transport of UMTS service
WIRELESS CABIN ARCHITECTURE
-
SPACE SEGMENT
(Satellite segment)
I. For interconnection of the cabin with the
terrestrial telecom networks.
WIRELESS CABIN ARCHITECTURE
SPACE SEGMENT
-
WIRELESS CABIN ARCHITECTURE
GROUND SEGMENT
I. For interconnection to the
terrestrial personal and data
networks as well as the Internet
backbone.
-
SATELLITE CONNECTION
ARYABHATA CARTOSAT-2C
- The composition of Air traffic
satellite system
Support the air traffic control and for
weather observations
Higher reliability, integrity, and operational
continuity are required
SATELLITE CONNECTION
-
SATELLITE CONNECTION
It will cover the areas especially
over oceanic regions
Bandwidth
Geostationary Satellite
-
TECHNICAL OVERVIEW
UMTS
(The Universal Mobile Telecommunication System)
Third generation mobile communication system
Developed within the IMT-2000 frameworks
The air interface UTRAN (UMTS terrestrial radio access),applicable in two existence
duplexing scheme-
UMTS-FDD
UMTS-TDD
-
TECHNICAL OVERVIEW
Coverage range is capacity
dependent that is from 200m to
1.4 km. known as “cell breathing”.
Maximum bit rate is 2mbps.
-
TECHNICAL OVERVIEW
BLUETOOTH
Operates in 2.4 GHZ ISM band.
Uses a (Frequency-hopping spread
spectrum) FHSS technique to minimize
interference.
Has a range 10 meters.
Bandwidth is 1 MHz
Maximum bit rate is 1 Mbps.
-
WIRELESS-LAN (W-LAN)
Provides Superior bandwidth compare to any cellular technology
i.e. 26MHz.
Operates in 2.4GHz ISM band.
Uses DSSS (Direct sequence spread spectrum) technique to
minimize interference
Maximum bit rate is 11Mbps.
TECHNICAL OVERVIEW
-
TECHNICAL OVERVIEW
Coverage range is 20-100
meters.
-
Bit rates Bw.(MHz) Band(GHz) Coverage
Range(m.)
Duplexing
Scheme
Tx.P.
(dBm)
Modulation
Max Typ
UMTS 2Mbps 144Kbps 5,10,20 FDD:
1.92-
1.90(ul)
2.11-
2.17(dl)
TDD:
1.90-1.92
2.01-2.025
Depends
on capacity
FDD/TDD 20 QPSK(dL)
BPSK (uL)
Bluetooth1Mbps 728 Kbps 1 2.4-2.4835 10 TDD 0 GFSK
IEEE
802.11b
11Mbps 6,5Mbps 26 2.4-2.4835 20-100 TDD 20 Depends on
bit rate
TABLE OF TECHNICAL OVERVIEW
-
SERVICE INTEGRATOR AND DIMENSION
INTEGRATOR
The service integrator will provide the
interfaces for the wireless and wired service
access points in the cabin.
DIMENSION
The system dimensioning process can be
structured in several steps:-
Determination of gross traffic per aircraft
using the multi-service model.
Determination of the timely and locally
varying traffic.
-
ADVANTAGES
The passengers of both business and economy could use their own wireless
equipment.
The passengers can be reached under their usual telephone number, they may have
available telephone numbers or other data stored in their cell phones or PDAs
Their laptops have the software they are used to, the documents they need and with
their personalized configuration (starting web site, bookmarks, address book).
Saving of the investment that would suppose the installation of terminals (screens,
stations, and wired telephones)
- DISADVANTAGES
It should not be seen an alternative to a wired
architecture in aircraft.
-
CONCLUSION
Airlines aims at providing various other entertainment and
communication equipment's in the nearest future. Since people are
becoming more attached to the communication resources such as
Network Interface Cards and dial-up connections, airlines have to
accommodate such facilities for the betterment of travel experience. It
focusses on the wireless services such as UMTS and WLAN to connect
the passengers via satellite or terrestrial services. In aeronautical
scenario, global coverage is quite needed for providing a continuous
service. Therefore, satellite communication became indispensable and
together with ever increasing data rate, requirement of applications,
aeronautical communication meets an expensive market.
No comments:
Post a Comment